|
Officine Sangiacomo is one of Europe's foremost manufacturers of Mechanical Presses.
They are located in Vittorio Veneto,
Italy, a town
at the foot of the Dolomites, around a 40-minute drive from Marco Polo
Airport Venice.
Over the course of the last few years, Sangiacomo
have extended their range to produce both C Frame and Double/Straight Sided
Presses. From 10 Tonnes to 600 Tonnes. They are constructed from the best
materials using the latest CNC Machine Tools and a highly skilled motivated
workforce. Most are sold domestically in Europe
but they are also sold world wide through a series of distributors and
agents.
Links: http://www.sangiacomopresse.it
SANGIACOMO
POWER PRESSES
C Frame Mechanical
Cast Iron Eccentric Shaft Type Press mounted on a fabricated steel base.
Standard features include Inclination, Pneumatic Clutch and Brake, Adjustable
Stroke, Cyclic Diagnostic Monitoring, Stroke Counter,
|
T10CE
|
10 Tonnes
|
6 - 40mm Stroke
|
190 SPM
|
View Image
|
|
T15CE
|
15 Tonnes
|
7 - 60mm Stroke
|
165 SPM
|
View Image
|
As above but
Standard Gap Frame.
Fabricated
Solid Steel (no inclination) Gap Frame Press, as above with the addition of
hydraulic overload device, six guide ram. (T50 and T75 only Air Balance to
Ram)
|
T30CE
|
30 Tonnes
|
9 -76mm Stroke
|
145 SPM
|
View Image
|
|
T40CE
|
40 Tonnes
|
8 - 78mm Stroke
|
145 SPM
|
View Image
|
|
T50CE
|
50 Tonnes
|
12 - 110mm Stroke
|
140 SPM
|
View Image
|
|
T75CE
|
75 Tonnes
|
14 - 140mm Stroke
|
120 SPM
|
View Image
|
Back Geared Gap
Frame Press.
|
T50RCE
|
50 Tonnes
|
12 - 110mm Stroke
|
80 SPM
|
View Image
|
|
T63RCE
|
63 Tonnes
|
12 - 140mm Stroke
|
70 SPM
|
View Image
|
|
T80RCE
|
80 Tonnes
|
14 - 150mm Stroke
|
65 SPM
|
View Image
|
|
T100RCE
|
100 Tonnes
|
17 - 180mm Stroke
|
60 SPM
|
View Image
|
|
T130RCE
|
130 Tonnes
|
16 - 200mm Stroke
|
55 SPM
|
View Image
|
As above but
with adjustable hydraulic overload and motorised ram adjustment.
|
T160RCE
|
160 Tonnes
|
15 - 220mm Stroke
|
50 SPM
|
View Image
|
|
T200RCE
|
200 Tonnes
|
19 - 230mm Stroke
|
45 SPM
|
View Image
|
|
T250RCE
|
250 Tonnes
|
15 - 220mm Stroke
|
42 SPM
|
View Image
|
Options
* Motorised Ram Adjustment
* Hydraulic Inclination.
* Pneumatic Die Holder
* Twin or Variable Speed Drive
* Tie Bars
* Automatic Stroke Adjustment
* NC or CNC Control
* Die Handling Equipment and Lifters
* Coil and Strip Feeders
* Guarding to suit.
Straight Sided Eccentric Presses
The range of Presses is designed with two connecting rods
and counter rotating front shafts. The design system perfectly balances the
rotating masses and by counter balance negates the components on the
connecting rod linkage, thereby avoiding asymmetrical wear on the ram guides.
Presses are available from 125 - 600 Tonnes, with work table
sizes from 1300 x 800mm to 2300 x 1450mm. They are either twin crank or
single crank machines. All conform to CE Legislation.
|
T125DM-DB
|
125 Tonnes
|
17 - 150mm Stroke
|
55 SPM
|
|
T160DM-DB
|
160 Tonnes
|
18 - 180mm Stroke
|
55 SPM
|
|
T200DM-DB
|
200 Tonnes
|
20 - 200mm Stroke
|
50 SPM
|
|
T250DM-DB
|
250 Tonnes
|
21 - 230mm Stroke
|
50 SPM
|
|
T315DM-DB
|
315 Tonnes
|
23 - 250mm Stroke
|
50 SPM
|
|
T400DM-DB
|
400 Tonnes
|
23 - 250mm Stroke
|
50 SPM
|
|
T600DM-DB
|
600 Tonnes
|
47 - 300mm Stroke
|
45 SPM
|
|
|
|
|
|
|
T250DM-DB2R
|
250 Tonnes
|
300mm
|
24 SPM
|
|
T315DM-DB2R
|
315 Tonnes
|
400mm
|
22 SPM
|
|
T400DM-DB2R
|
400 Tonnes
|
400mm
|
22 SPM
|
|
T600DM-DB2R
|
600 Tonnes
|
450mm
|
21 SPM
|
|
